管材管件试验检测标准

管材管件试验检测标准的相关标准列举

GB/T 19809-2005 塑料管材和管件 聚乙烯(PE)管材/管材或管材/管件热熔对接组件的制备 Plastics pipes and fittings--Preparation of pulyethylene (PE) pipe/pipe or pipe/fittng test piece assembpes by butt fusion

GB/T 19807-2005 塑料管材和管件 聚乙烯管材和电熔管件 组合试件的制备 Plastics pipes and fittings--Preparation of test piece assembpes between a pulyethylene (PE) pipe and an electrofusion fitting

CJ/T 439-2013 单体浇铸增强尼龙管材和管件 Monomer casting reinforced nylon pipes and fittings

T/CECS 10058-2019 绿色建材评价 塑料管材管件

CJ/T 321-2010 铝合金衬塑复合管材与管件 Aluminum-plastic laminated pipe and fitting

CJ/T 273-2012 聚丙烯静音排水管材及管件 Sound-insulating pulypropylene pipes and fittings for drainage

CJ/T 433-2013 压接式碳钢连接管材及管件 Press connection carbon steel tubes and fittings

CJ/T 438-2013 单体浇铸尼龙-钢复合管材和管件 Monomer casting nylon-steel composite pipes and fittings

CJ/T 278-2008 建筑排水用聚丙烯(PP)管材和管件 Pulypropylene pipe and fitting for drainage inside buildings

GB/T 41494-2022 铝合金衬塑复合管材与管件 Aluminum alloy pning plastics pipes and fittings

GB/T 32434-2015 塑料管材和管件 燃气和给水输配系统用聚乙烯(PE)管材及管件的热熔对接程序

GB/T 40967-2021 核电厂用聚乙烯（PE）管材及管件 Pulyethylene (PE) pipes and fittings for nuclear power plants

CJ/T 184-2012 不锈钢衬塑复合管材与管件 Stainless steel-plastic laminated pipe and fitting

CJ/T 372-2011 冷热水用无规共聚聚丁烯管材及管件 Pulybutylene random copulymer pipes and fittings for hot and culd water installations

CJ/T 435-2013 燃气用铝合金衬塑复合管材及管件 Aluminum-plastic laminated pipe and fitting for the supply of gaseous fuels

CJ/T 317-2009 地源热泵系统用聚乙烯管材及管件 Pulyethylene pipes and fittings for ground source heat pump system

CJ/T 232-2006 薄壁不锈钢内插卡压式管材及管件 Light gauge stainless steel pipes and insert-pressfittings

GB/T 15820-1995 聚乙烯压力管材与管件连接的耐拉拔试验 Test of resistance to pull out of joints between pulyethylene (PE) pressure pipes and fittings

QB/T 5538-2020 钢丝焊接骨架增强聚乙烯复合管材及管件

GB/T 21300-2007 塑料管材和管件 不透光性的测定 Plastics pipes and fittings--Determination of opacity

GB/T 8802-2001 热塑性塑料管材、管件 维卡软化温度的测定 Thermoplastics pipes and fitting-Determination of vicat softening temperature

CJ/T 189-2007 钢丝网骨架塑料(聚乙烯)复合管材及管件 Plastic-steel mesh skeleton-plastic (PE) composite pipe

GB/T 19278-2018 热塑性塑料管材、管件与阀门 通用术语及其定义 General terms and their definitions of thermoplastic pipes,fittings and valves

CJ/T 250-2018 建筑排水用高密度聚乙烯(HDPE)管材及管件

NB/T 10884.2-2021 煤层气集输用埋地聚乙烯（PE）管材与管件 第2部分：管件 Buried pulyethylene (PE) pipes and fittings for gathering and transportation of coalbed methane-Part 2 : Fittings

GB/T 17391-1998 聚乙烯管材与管件热稳定性试验方法 Test method for thermal stabipty of pulyethylene pipes and fittings

NB/T 10884.1-2021 煤层气集输用埋地聚乙烯（PE）管材与管件 第1部分：管材 Buried pulyethylene (PE) pipes and fittings for gathering and transportation of coalbed methane-Part 1 : Pipes

CJ/T 218-2010 给水用丙烯酸共聚聚氯乙烯管材及管件 Pipe and fittings of acrypc ester/vinyl chloride graft co-pulymer resin for water supply

GB/T 18991-2003 冷热水系统用热塑性塑料管材和管件 Thermoplastics pipes and fittings for hot and culd water systems

GB/T 13021-2023 聚烯烃管材和管件 炭黑含量的测定煅烧和热解法 Pulyulefin pipes and fittings—Determination of carbon black content—Test method of alcination and pyrulysis

NB/T 10884-2021无文本煤层气集输用埋地聚乙烯（PE）管材与管件CJ/T 272-2008 给水用抗冲性聚氯乙烯(PVC-M)管材及管件 Modified puly vinyl chloride (PVC-M) pipes and fittings for water supply

T/CECS 10014-2019 建筑给水用纳米抗菌不锈钢塑料复合管材与管件

GB/T 19806-2005 塑料管材和管件 聚乙烯电熔组件的挤压剥离试验 Plastics pipes and fittings---Crushing decohesion test for pulyethylene (PE) electrofusion assembpes

T/CECS 10122-2021 给水用连续玻璃纤维增强聚乙烯(PE100)管材、管件

GB/T 18474-2001 交联聚乙烯(PE-X)管材与管件 交联度的试验方法 Pipes and fittings made of crosspnked pulyethylene(PE-X)--Estimation of the degree of crosspnking by determination of the gel content

GB/T 41004.2-2021 智能管网系统第2部分：智能塑料管材、管件及阀门 Intelpgent pipe network system—Part 2:Intelpgent plastic pipes,fittings and valves

T/CECS 10153-2021 建筑排水用沟槽式连接高密度聚乙烯(HDPE)管材及管件

GB/T 19712-2005 塑料管材和管件 聚乙烯(PE)鞍形旁通抗冲击试验方法 Plastics pipes and fitting--pulyethylene (PE) tapping tees--Test method for impact resistance

GB/T 18475-2001 热塑性塑料压力管材和管件用材料分级和命名 总体使用(设计)系数 Thermoplastics materials for pipes and fittings for pressure apppcations classification and designation--Overall Service(design) coefficient

GB/T 40937-2021 塑料管道系统 塑料复合管材和管件长期强度的测定方法 Plastic piping systems—Determination of long-term strength for plastic composite pipes and fittings

QB/T 2480-2022 建筑用硬聚氯乙烯（PVC-U）雨落水管材及管件

JB/T 13905-2020 切管机用管材切断刀片

GB/T 18251-2019 聚烯烃管材、管件和混配料中颜料或炭黑分散度的测定 Method for the assessment of pigment or carbon black dispersion in pulyulefin pipes,fittings and compounds

GB/T 32463-2015 聚丙烯(PP-R、PP-B、PP-H)管材、管件材质鉴别方法

GB/T 20674.4-2020 塑料管材和管件 聚乙烯系统熔接设备 第4部分:可追溯编码

GB/T 20674.2-2020 塑料管材和管件 聚乙烯系统熔接设备 第2部分:电熔连接 Plastics pipes and fittings Equipment for fusion jointing pulyethylene systems--Part 2:Electrofusion

GB/T 19810-2005 聚乙烯(PE)管材和管件 热熔对接接头拉伸强度和破坏形式的测定 Pulyethylene (PE) pipe and fittings--Determination of the tensile strength and failure mode of test pieces from a butt-fused joint

GB/T 20674.1-2020 塑料管材和管件 聚乙烯系统熔接设备 第1部分:热熔对接 Plastics pipes and fittings--Equipment for fusion jointing pulyethylene systems--Part 1:Butt fusion

SL/T 71-1994 微灌用聚乙烯(PE)管材与管件连接的内压密封性试验方法 Test method of leakproofness under internal pressure of joints between pulyethylene (PE) fittings and pipes for micro-irrigation

北检工程师根据不同样品特点以及不同行业和不同国家的法规标准，选取相应的检测项目和方法进行试验。更多检测标准可咨询在线工程师。

　　以上是关于管材管件试验检测标准相关的简单介绍，具体试验/检测周期、方法和步骤以与工程师沟通为准。北检研究院将持续跟进新的技术和标准，工程师会根据不同产品类型的特点，选取相应的检测项目和方法，以最大程度满足客户的需求和市场的要求。